A ballast-free mounting of PV systems on foil roofs and roofs or bitumen roofs is possible with a specific form of the flat roof system: adhesive mounting. The damage of the roof gets prevented in this way. The adhesive mounting is especially suitable for roofs with low load reserves. The solar modules can only get mounted horizontally and with a maximum work angle of 25°.
The base of the PV mounting system is a two-component liquid synthetic material that is spread on the roof panel. To guarantee a proper product application you’re getting instructed by qualified personnel with detailed system training and after a successful participation you receive a certificate that proofs your qualification.
Installation Site: ground, flat ,tilt roof, tile roof, vitreous tile, any suitable area
Installation Angle: 10-60 °
Snow Load: up to 1.4 KN/m2 (40psf)
Wind Load: up to 36.9 m/s (150 km/h)
Wind Pressure: up to 66.42 KG/m2
Module Orientation: Horizontal / Vertical
Applicable Module: Any brand of PV solar power panel module
Frame material: aluminum alloy 6063-T5
Warranty: 10 years
● suitable for most types of flat roofs
● easy to assemble because of pre-drilled components
● Fast and simple mounting
● distance of roof edge min. 0,5 m
● low costs