Product Introduction
Reysolar Tile Roof Solar Mounting System, accommodating a wide range of modules framed or frameless, is suitable for most types of roof with different roof hooks.
With innovative Reysolar rail, roof mount enables significantly fast and easy installation.
Reysolar Pitched Roof solar mounting system is specially developed for the maximum flexibility in designing for both residential and commercial rooftop solar system.
Technical Parameters
Installation Site: Pitched Roof (Flat roof per request)
Installation Angle: 5-45 degrees
Wind Load: 80m/s
Snow Load: 1.5KN/m2
PV Modules: Framed, unframed
Module Orientation: Portrait and landscape
Standards: AS/NZS 1170/DIN 1055/JIS C 8955: 2011/International Building Code IBC 2009/California Building Code CBC 2010
Profile Materials: Extruded aluminum
Fasten Part: Totally anodized(6005-T5)
Small Components: Stainless steel(SUS304)
Color: Silvery or according to customer requirements
Warranty: 10 years
Certification
Factory
Required Information to Design and Quote
1. PV Panels Dimension: ____________________________mm
2. Wind Speed: ________________m/s
3. Snow Speed: ________________KN/m2
4. Panel Array Layout: _____________no's in a row
5. Tilt Angle: ________________o
6. Panel Direction: ______________________(Landscape/Portrait)
7. Clearance Height: ________________mm
8. Foundation Type: ______________________(Concrete/Pile/Ground Screw)
9. Roof Type: ______________________(Tin/metal/tile/slate/shingle roof/flat roof)
You are welcome to send us an inquiry for more information. Our products can meet requirement of any install solutions. Customized designs are accepted.